Burn-Easy Installation and two photos coming
Burn-Easy recommends that its incinerators be installed in accordance with local codes and ordinances. If on-site testing is required, it is the responsibility of the purchaser and can be arranged through the factory. Outside installation is recommended. Inside installations may have special insurance requirements. Factory must be advised. Seller shall not be liable for any injury or damage to person(s) or property or any other incidental or consequential damages.

BURN-EASY WARRANTY: Burn-Easy Crematories feature a limited one year warranty from the date of purchase on all materials and workmanship used in the construction of our crematories, including all purchased electrical parts such as burners, fans, timers and other controls.

Standard Burn-Easy Models
Burn-Easy has redesigned its standard models to feature three times the reinforcement of its previous models. In addition to the heavy 3/8” to 1/2” heat tempered steel shell, these units are specially fabricated with four 1” x 2” solid bars welded completely across the unit on both sides of the door opening(s). Added reinforcement angles are welded on the inside of the incinerator. All welds are solid throughout - not “skip welded” - preventing premature breakdown of the outer steel shell. Model 18, 34, 36, units do not have refractory lining and thermostat controls.

Model 529

Model 529 with a load capacity of 2100 lb. Loading door size is 77 in. length x 43 in. width Dimensions 52 in. diameter x 9 ft. length

For Detailed Specifications

Model 428

For even larger producers, we offer our Model 428, which holds up to 1200 lbs. Model 428 features one door measuring 66” x 32”, with winch, top-load opening.

For Detailed Specifications

Models 367-1 & 367-2W

For even larger producers, we offer our Model 367.  Measuring a full 7’ by 36” in diameter, Model 367 holds up to a 700 lb. load.  Model 367-2 features one door in four sizes 18" x 30", 36", 42", 48". The 367-2 has a 22" x 54" double door top load opening.

367 Detailed Specifications

367-2 Detailed Specifications

Model 37-2W & Model 37-2W-1?????Use 36 photo

For large producers, we offer our Model 30-2 and 37-2.  Model 30-2 measures 6’ x 30”
in diameter and holds up to a 400 lb. load; Model 37-2 measures 7’ x 30” in diameter and holds up to a 500 lb. load.  Both models feature a 48” x 23” top load opening.

For Detailed Specifications

Model 37-1

Model 37-1 measures 7’ x 30” and holds up to a 500 lb. load. These models feature a 19” x 28”, 36” or 42” top-loading single door."

For Detailed Specifications

Model 36

"Our Model 36 measures 6’ x 30” Single Door, top Loading 18" x 30", 36", 42", and holds up to 400 lbs.

For Detailed Specifications

Model 34

"These single door Top Loading unit are widely used by the pork, poultry and veterinary industries. Measuring 4’ x 30”, Single Door 18" x 30" our Model 34 will handle up to a 200 lb. load.

For Detailed Specifications

Model 30-2W Use same photo 36?????

For large producers, we offer our Model 30-2 and 37-2.  Model 30-2 measures 6’ x 30”
in diameter and holds up to a 400 lb. load; Model 37-2 measures 7’ x 30” in diameter and holds up to a 500 lb. load.  Both models feature a 48” x 23” top load opening.

For Detailed Specifications

Model 18

With a capacity of up to 100 lbs., our Model 18 measures 4’ x 20” in diameter and is excellent for the small nursery, farrowing or medium sized poultry farm.

For Detailed Specifications

Model 20 After Burner Large Take off and place the optional

For Detailed Specifications

Model 12 After Burner- small

Direct fire secondary burners may be purchased with your cremator or added on-site later. With the rugged flange design, the burner can be securely bolted in rather than welded. Secondary burners are constructed of 1/4” steel with the special refractory block lining on the Model 20SB. from (Val co)

For Detailed specifications